|
|
|
|
|
|
|
|
|
|
|
|
|
|
Kreg multi-purpose project blocks are the ideal way to support, hold and work on projects anywhere. These incredibly versatile blocks elevate your material to sit 1-1/2 in above the work surface for convenient sanding, finishing, routing and much more. The blocks feature a GripMaxx? surface on each face, one side to grip your workpiece and one side to prevent the blocks from moving around on your workstation. That's ideal for tasks like sanding when you don't want anything slipping and sliding. Elevating the material makes routing edges easier with added clearance for the router bit. The height also gives clamps room to fit the clamp head under the workpiece, which is useful for drilling pocket holes or assembling your project. When it comes to painting or finishing, use the retractable painting point with GripMaxx? for a little extra height. Just twist the project block to raise the point to rest your material on, the painting points won't even stick to your material or ruin your finish. Each purchase comes with a set of 4 pucks, with a collective 200 lb weight capacity, to easily balance your project of choice.
|
The True-FLEX? featherboard gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, which results in imperfect cuts and less than safe operation. The True-FLEX? featherboard provides a consistent and optimum pressure and will stand up to years of heavy use in your woodshop. The featherboard is made from an extremely durable plastic composite body and includes a Wedge-Lock? system that allows the featherboard to be secured to a variety of shop tools without the need for additional hardware. Whether you're using a miter-slot or a T-slot, working on a table saw or a router table, the Wedge-Lock? system adjusts accordingly and lets you work with confidence. Designed for use in standard 3/8 in x 3/4 in (9 mm x 19 mm) miter slot.
|
The True-FLEX? feather board gets its name from the careful engineering that went into its design. Many feather board on the market today apply too much pressure or not enough pressure to the workpiece, which results in imperfect cuts and less than safe operation. The True-FLEX? feather board provides a consistent and optimum pressure and will stand up to years of heavy use in your woodshop. The feather board is made from an extremely durable plastic composite body and includes a Wedge-Lock? system that allows the feather board to be secured to a variety of shop tools without the need for additional hardware. Whether you are using a miter slot or a T-slot, working on a table saw or a router table, the Wedge-Lock? system adjusts accordingly and lets you work with confidence. Designed for use in standard 3/8 in x 3/4 in miter slot.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make perfect corner profiles with any router using the corner routing guide set. You can create decorative corners in three simple steps. First, select and attach the profile you want. Next, adjust the edge stop posts to your material. Finally, rout and you'll get perfect results every time. The guide works with trim routers, handheld routers and even router tables.
|
Add safety and convenience to your Kreg? precision router table with this handy power switch. This unique switch features a two-plug design to control two independent devices at once, Key-Lok? to eliminate accidental power-on and an 8 ft long, heavy-duty, 14 ga power cord - a perfect companion to the Kreg? precision router table and Kreg? precision benchtop router table.
|
Whether you're working on a table saw, router table or shaper, setting your tool to the precise height necessary is absolutely essential. The exclusive three-gauge design of the precision setup bars makes them perfect for a wide variety of applications. The concave step on the bottom of each setup bar straddles your router bit or saw blade to allow for precise height adjustment. The step on the top edge of each setup bar acts as a gauge to test the depth of your completed cuts. The step on the end of each setup bar can be used to set the distance from a tablesaw blade to the fence or a router bit to the fence.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy-duty all steel construction, stand supports up to 400 lb. Accommodates all brands of miter saws, including 12 in sliding miter saws. Quick-release mounting brackets for easy miter saw mounting and removal. Tool-free adjustment of material supports and extension arms. Material supports include rollers and positive stops for repetitive cuts. Weighs 41.8 lb.
|
The precision router lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table the 3/8 x 9-1/4 x 11-3/4 in plate fits all Kreg? router tables plus many popular brands and accepts any of 20 plus popular router models without the need adapters or modifications in a high-performance carriage that you raise and lower from above the table. With the precision router lift, there's no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lift's included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple and accurate so you can set-up your router faster and then dial in the exact bit height you require using the precision router lift's built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.
|
|
|
