|
|
|
|
|
|
|
|
|
|
|
|
|
|
Slotted holes for universal use. Packed with installation screws.
|
Slotted holes for universal use. Packed with installation screws.
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The spring is perfect to use on screen or storm doors for positive closing action. It has a steel construction with zinc finish.
|
Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.
|
Designed for doors and lightweight gates. Looped ends for installation. Does not include hooks. Boxed, zinc-plated finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heavy steel with extruded bearing in housing and rocker arm - assures smooth action. Includes screw.
|
This sliding screen door corner assembly is used on Jim Walters Doors and several other manufacturers. It is an all-in-one corner and roller combination. It is made of stamped aluminum with an adjustment screw and center grooved spring activated high density polyethylene roller attached at the end of the bottom leg. The roller is 1 in Dia. The corner fits into the sliding screen door frame holding the bottom or top rails and the side stiles together.
|
Wright Products repair jamb bracket is ideal for door jambs that have been damaged, this jamb bracket works with all storm and screen door closers and contains a wider base that reaches out to "grab" undamaged wood.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wright Products repair jamb bracket is ideal for door jambs that have been damaged, this jamb bracket works with all storm and screen door closers and contains a wider base that reaches out to "grab" undamaged wood.
|
Length adjusts from 13 to 17 in.
|
Wright Products storm door chain is recommended for all screen or storm doors. This chain helps prevent both door and closer damage due to wind gusts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This roller assembly with M shaped tension spring with a 1 in high density polyethylene ball bearing roller is used by several patio door manufacturers. The heat-treated tension spring is 2-5/16 in L and shaped like an M giving it the tension needed by the screen door to slide properly.
|
Prime-Line Bug Seal, Vinyl, 7 in L, 3/4 to 1-3/8 in W
|
Heavy-duty spring designed for gates and screen and storm doors, as well as for projects requiring an extra-heavy spring. Looped ends for installation. Does not include hooks. Boxed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For lightweight storm doors and wood doors. Full 90 degree opening. Two hole end plug for summer or winter. Adjustable latching power and closing speed. Factory lubricated. Visual pack.
|
Wright Products most popular medium-duty storm and screen door closer is ideal for medium to lightweight out swinging doors. This closer offers a full 90 deg opening, is factory lubricated and contains an adjustable closing speed.
|
This sliding screen door roller assembly is made from a steel housing with a 1 in steel ball bearing roller. The roller arm is adjustable with the adjusting screw on the end of the roller assembly. Often found on Peachtree sliding screen doors as well as other patio door manufacturers. Installation only requires the roller assembly to be inserted into the rectangle opening in the bottom of the door frame. Then you slide it back until the installation holes align and install the screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This sliding screen door roller assembly fits the Andersen Narroline, Frenchwood and Perma-Shield doors. The roller assembly snaps into place with the adjustment stem being accessible on the edge of the door frame. The housing is high density polyethylene with a grooved 1-1/4 in Dia high density polyethylene roller.
|
This steel housing and spring-loaded arm with the 1 in steel ball bearing roller attached is used by Bay-Mills as well as several patio door manufacturers. The roller arm is spring-loaded and adjusted by the adjustment sleeve and screw on top.
|
Wright Products universal knob latch is ideal for most screen doors providing traditional style with functionality. Replaces both 1-3/4 in and 3 in hole spacing patterns without the need to drill new holes. The interior plate contains a night lock feature for added security.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wright Products universal knob latch is ideal for most screen doors providing traditional style with functionality. Replaces both 1-3/4 in and 3 in hole spacing patterns without the need to drill new holes. The interior plate contains a night lock feature for added security.
|
Wright Products most traditional pushbutton latch, this latch can be used on most storm or screen doors with 1-3/4 in hole spacing. The inside latch contains our 'No Lock Out' feature eliminating the worry of accidentally being locked out of your home.
|
Wright Products most popular pushbutton latch, this latch can be used on most storm or screen doors with 1-3/4 in hole spacing. The inside latch contains our 'No Lock Out' feature eliminating the worry of accidentally being locked out of your home.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wright Products most traditional keyed pushbutton latch. This latch can be used on most storm or screen doors with 1-3/4 in hole spacing. The inside latch contains our No Lock Out feature eliminating the worry of accidentally being locked out of your home.
|
Wright Products most traditional pushbutton latch, this latch can be used on most storm or screen doors with 1-3/4 in hole spacing. The inside latch contains our 'No Lock Out' feature eliminating the worry of accidentally being locked out of your home.
|
Wright Products keyed colonial pushbutton latch can be used on most storm or screen doors with 1-3/4 in hole spacing. The inside latch contains our 'No Lock Out' feature eliminating the worry of accidentally being locked out of your home.
|
|
|
