|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Silicon carbide grinding stone are designed to grind and etch stone, glass, ceramics, porcelain and non-ferrous metals.
|
|
A high-quality industrial abrasive made for extended general-purpose grinding on metals, castings, welded joints, rivets and rust.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit).
|
|
Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8"" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4"" bit diameter (6.4 mm). Pack of 6."
|
|
DREMEL? accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the DREMEL? chain saw sharpening attachment.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DREMEL? chain saw sharpening stone is for use with DREMEL? chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety.
|
Precision ground abrasive stone for quick, easy sharpening of chain saw blades.
|
The DERMEL EZ lock makes accessory changes easy as pull twist release. The one-piece mandrel design simplifies the process of changing accessories, for use with the EZ402 EZ lock mandrel or standard 402 mandrel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass.
|
The Dremel sanding drum mandrel holds a sanding band covered with an aluminum oxide abrasive. Sanding bands used on the sanding drum mandrel are sold separately. 1/2 in bit diameter.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them.
|
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 rpm.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Get a 15/16 in Dia cut-off wheel made of a hard abrasive material that's used for slicing and cutting metal, including hardened steel. Our cut-off wheel makes it easy to cut bolts or screws or make slots in rusted or stripped bolts and screws to allow for easy removal with a screwdriver.
|
Replaceable bit for the 290 Dremel? (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.
|
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
Made of high-quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 rpm.
|
|
|
