|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.
|
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7 to 16 in hub diameter that extends from back 1/8 in.
|
Injection-molded plastic bottom guide fits 7/16 in thick door panels. Installed with double sided tape or snaps into extrusion fin. Used by several shower door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
Gray vinyl, star tip design inserts into receiver channel on door. The 1-5/16 in height fits many older style drip rail systems. For use on hinged shower doors.
|
M 6014 is a swinging shower door catch that mounts onto the swinging door frame. The stainless steel housing contains a spring-loaded plastic latch and is adjustable. The mounting holes (slots) are 1 in apart.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ball bearing construction, nylon wheel with 8-32 threaded center hole and 7 to 16 in hub diameter that extends from back 1/8 in.
|
1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
Injection-molded plastic bottom guide fits up to 1/2 in thick door panels. Installed with double sided tape included. Used by several shower door manufacturers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gray plastic bottom guide edge mounts onto base frame with screws. Fits 7/16 in thick panels.
|
Gray vinyl, universal design, 1-1/2 in flat shape fits most older style drip rail systems. For use on hinged shower doors.
|
Bottom guide used to keep glass door panels separated. Snaps into place on base of enclosure. Clear vinyl material.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.
|
Bottom guide for sliding shower enclosure doors.
|
Plated die-cast handles outside handle with threaded studs and inside handle with holes supplied with stainless steel machine screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plated die-cast handles outside handle with threaded studs and inside handle with holes supplied with stainless steel machine screws.
|
Plated die-cast handles, outside handle with threaded studs and inside handle with holes, supplied with stainless steel machine screws. Contains one handle set with installation screws.
|
Extruded aluminum adjustable bracket with glazing vinyl, chrome finish. It accepts up to 1/4 in thick glass panels and has 3/4 in OD round edge plastic wheel, steel ball bearings. It is perfect for use on frameless shower doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear acrylic bottom guide for sliding tub enclosure doors. Fits on 1/2 in thick panels. Used by Sterling and others.
|
Prime-Line Shower Door Bottom Seal, Half-Round, Vinyl, Black, Dimensions: 36 in L x 5/32 in W x 13/16 in H
|
Prime-Line Shower Door Bottom Seal, Vinyl, Clear, Dimensions: 37 in L x 3/32 in W x 1 in H
|
|
|
