|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 3 in line level is simple, yet accurate. Its flat bottom allows for easy surface leveling. With special hooks for free sliding and high-visibility tinted liquid in vial for clear readings, this tool helps you read and mark angles with ease.
|
The ideal addition to every toolbox, this 3 in line level's lightweight design reduces line sag, for an accurate reading every time. It is also highly durable thanks to its impact-resistant Structo-Cast? construction and features unrestricted hooks that allow for easy movement.
|
Trim and lightweight metallic colored ABS case with durable key ring for convenience. Yellow, blade lacquer-coated for added rust protection, slide lock keeps blade extended as needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This lightweight aluminum level has special hooks to hold line allowing the level to slide freely and a flat bottom for surface leveling.
|
As a saw guide, stair layout tool or rafter tool, Johnson's 7 in rafter square will help you get the job done accurately and easily. It features Johnson's unique Structo-Cast? molded frame that is both lightweight and durable as well as permanent molded graduations for making quick and easy measurements. This rafter square comes with handy markers that measure 2x4 board dimensions of 1-1/2 in, 3 in and 3-1/2 in. And you'll always find this square quickly in your toolbox thanks to its fluorescent, easy-to-see color.
|
This convenient pocket level is always within reach for taking accurate measurements on the fly. It fits easily in your utility drawer, tool box or glove compartment and has a metal pocket clip so you can effortlessly keep it on you as you move about your jobsite. The acrylic vial and high-impact body are highly durable and the level features a V-groove edge that fits on pipe and conduit. The tip is also magnetic, making the level a handy pickup tool as well.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located.
|
The 8 in Speedlite? square is formed from lightweight, high-impact structural composite and is available in matte gray, high-visibility yellow and high-visibility orange. It's basically the same as the one and only Speed? square but is also great for use with siding and other delicate materials, since it won't mar soft finishes. Plus, its 8 in size means it's ideal for marking cuts in 8 in siding. Look for the Diamond?.
|
Johnson's 8 in T-bevel takes the guesswork out of angle duplication and eliminates the problems associated with analog readings and manual measurement transfer. It features a heavy-duty adjustable stainless steel blade that will never rust or corrode, as well as a durable Structo-Cast? high-impact handle with a hand grip. Its durable locking nut holds the blade securely in place to keep your work accurate when transferring angles.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable stainless steel blade with built-in blade lock for transferring angles. Tough 5-1/2 in, plastic handle provides handy and comfortable grip.
|
The high-visibility torpedo level is durable and accurate. Its top-read feature allows visibility from above for easy reading and marking. Constructed of ABS plastic for impact resistance and tinted 360 deg vials for visibility, this tool is built for accuracy, ease of use and durability.
|
The LUFKIN L600N Series tape measures feature a bright orange textured case for easier grip and increased user comfort. The blade has a matte finish which reduces glare which increases blade legibility. The blade is also nylon coated for an extended product life. The dual riveted end hook tips allow the user to mark measurements without the need for a writing utensil.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The #803 stair gage set speeds and improves the quality of repetitive work, including making angle cuts on rafters and stair stringers.
|
Lightweight construction minimizes line sag. Unbendable open hooks allow level to slide freely. Pocket clip will guard tool against loss.
|
Featuring a polymer-coated blade, high-impact ABS case and a Tru-Zero? end hook, pros and DIYers alike can count on this Stanley 25 ft tape measure for precise measurements and long-lasting durability. It's easy to read, easy to use and built for dependability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The ideal addition to every toolbox, this 3 in line level's durable, lightweight aluminum construction reduces line sag, for an accurate reading every time. It features unrestricted hooks that allow for easy movement.
|
Works as a rafter square, try square, protract or a power saw guide. Lightweight compact heavy-duty ABS plastic body fits conveniently into pocket or tool belt. Detailed instruction book included.
|
The essential marking and checking tool for any woodworker, this 8 in try and miter square makes assessing angles and marking straight cuts easy and accurate. Its Structo-Cast? handle is both durable and lightweight, while its heavy-duty blade is made of stainless steel so you'll never need to worry about rust or corrosion. This square features graduations in 1/8 in increments that are permanently etched in black for easy visibility.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Make your next stair or rafter work fast, easy and accurate with Johnson's gauge set. These flush-mounted, brass-plated thumbscrews are durable and ideal for repeat angle cuts when laying out stairs and rafters. They attach to all standard framing and carpenter squares.
|
The Stanley 12-by-1/2 in tape measure features a polymer-coated blade for long life, a durable textured case for a non-slip grip and high-contrast colors for easy readability, with numerical readouts every 1/8 in. It measures 12 ft in L by 1/2 in W and stands out 7 ft.
|
Johnson's easy-to-use 12 in Structo-Cast? combination square gives you the accuracy and precision you need for every job. Its stainless steel blade has English graduations of 1/8 in, 1/16 in and 1/32 in that are permanently stamped, so you'll never worry about them wearing or fading. It also features a durable acrylic vial and heavy-duty Structo-Cast? molded reversible head with a lock bolt and steel screw to ensure your measurements are spot-on every time.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Crafted from sturdy extruded aluminum, this yardstick features screened, thermal-bonded black graduations in 1/8 in and 1/16 in that are easy to read. And the yardstick's clear, protective anodized finish protects it from wear and tear, extending the life of the tool.
|
Precision made, with etched fine black graduations, on stainless steel finish. Side 1 including 10, 100 and side 2 including 32, 64.
|
The #230 economy straight leaf feeler gage is ideal for adjusting and gaging spark plugs, distributor points and valve clearances, as well as measuring spaces between parts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Level posts and pipes accurately and with ease using Johnson's post and pipe level. This bright orange level features three rugged acrylic vials that read plumb and level simultaneously, while the reflective backing increases vial visibility for ease of use. The level comes with a rubber strap that quickly attaches to any post, pole or stringer for hands-free use when working on difficult, one-man jobs.
|
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
|
The Classic Stanley 10 ft PowerLock? pocket tape measure with diameter scale measures up to 3 ft, features a polymer-coated blade with secure blade lock and our Tru-Zero?? end hook for accurate measurements. Its slim, high-impact chrome ABS case is durable on the job.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 8 in Speedlite? level square is the only 8 in Speed? square on the market and also functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed? square, but is constructed of lightweight high-impact composite.
|
Lightweight aluminum body with durable plastic handle. Can be used to lay out 45 and 90 deg angles, 8 in blade with embossed 1/8 in graduations.
|
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
|
|
|
