|
|
|
|
|
|
|
|
|
|
|
|
|
|
N 6568 is a set of two nylon plastic closet pole sockets for a standard 1-3/8 in closet pole. The 2-3/16 in Dia reinforcement flange also dresses off the installed socket.
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
ClosetMaid Shelf End Cap, Dimensions: 1/4 in Dia x 0.4 in D, Plastic, White, Suitable for: ClosetMaid Shelf and Rod Shelving, Includes: (10) Small End Caps and (4) Large End Caps
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Support Bracket, 12 in L, 2 in W, 2 in H, White, Steel
|
Knape & Vogt Closet Pole End Cap, Plastic
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack? mounting systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits up to 1-3/8 in Dia closet pole or 1 in Dia pipe. Hardwood construction for maximum strength, extra deep holes for dropout prevention. Screws for each part included to make mounting quick, easy and strong. Includes one pair of pole sockets.
|
Allows installation of 2 shelf and rod brackets to the wall and 1 shelf to the brackets. Four 1-1/2 in pan head screws for mounting brackets to the wall. Four 3/4 in pan head screws for mounting shelf to the brackets. For best use install in wall studs. For use with 108 shelf and rod bracket.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
N 6794 is a set of machined hardwood closet pole sockets. They fit the standard 1-3/8 in closet pole. They have a natural finish and can be stained or painted if desired. There are two hardwood sockets and fasteners included in the package.
|
For 1-1/4 in Dia closet poles. Also fits up to 1-3/8 in Dia poles. Mounting screws included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to fit into the fast mount standards and load tested to 100 lb.
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
Use to join two shelves together to create a continuous run of shelving.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 36 in H x selected length. For use with ProSource shelving. UPC tagged.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
ClosetMaid Shelving Support Bracket, 16 L, 2 in W, 2 in H, White, Steel, Epoxy-Coated
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
