Home > HARDWARE > CONSTRUCTION HARDWARE > LUMBER / MOLDING/TRIM
Choose a sub category:
TREATED WOOD TRIM WOOD MOLDINGS WOOD MOLDING TRIM PIECES
PVC MOLDINGS MISC. SIDING MOUNTING BLOCKS
WALLBOARD MOLDING CABINET MOLDING / TRIM EDGE BANDING
HIDE-AWAY IRONING BOARDS WOOD LAMINATE DIMENSIONAL LUMBER
PLYWOOD PLASTIC PANELS & ACCESSORIES CRAFT WOOD
BACKSPLASH PANELS & TRIM
Sort By:
1 2 3 ... 7
Band-It 25233 Replacement Single Bevel Edge Trimmer Blade Marine Ornamental Tiffany Fancy Post Cap Waddell IBTB52 Inside Base Corner
Cloverdale Replacement Single Bevel Edge Trimmer Blade, Dimensions: 1/64 x 3/4 x 1-3/4 in, Suitable for: 33437 Edge Trimmer Appearance-grade, southern yellow pine. MCA treatment, above ground contact. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
Waddell IBTB32 Inside Base Corner Waddell OBTB52 Out Base Corner Block Walltuf 92586 Inside Corner Molding
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. WallTuf Inside Corner Moulding, Inside Corner, Vinyl, White, 8 ft L
Walltuf 92589 Divider Molding Wall-Tuff 92588 Cap Molding Walltuf 92587 Outside Corner Molding
WallTuf Divider Moulding, White, Vinyl, 8 ft Actual Length WallTuf End Cap Moulding, Vinyl, White, 8 ft L, Suitable for: WallTuf Liner Panels Palclad wall and ceiling liner panels are ideally suited for both industrial and residential interior applications. These waterproof panels are lightweight, have an attractive surface texture, absorb scratches and clean up very easily. Palclad is a cost-effective alternative to traditional FRP panels. Manufactured from 100% recycled content.
Waddell RTB35M Rosette Trim Block Waddell RTB35 Beveled Edge Rosette Trim Block Waddell RTB25 Beveled Edge Rosette Trim Block
No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood.
American Wood PCOM-144 Common Board Palram 94361 Horizontal Closure Strip Palram 92770 Horizontal Closure Strip
ALEXANDRIA Moulding Common Board, Nominal Thickness: 1 in, Nominal Width: 4 in, Nominal Length: 4 ft, Species: Pine, #2 Grade Used under Sun-n-Rain panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation.
Palram 92771 Horizontal Closure Strip Palram 92772 Vertical Closure Strip Midwest Products 4044  Basswood Strips
Used under Palruf? or Suntop panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Use under Palram's corrugated panels to close off vertical edges for a finished look. Midwest Products Wood Strip, Nominal Thickness: 1/8 in, Nominal Width: 1/8 in, Nominal Length: 24 in
Marine Ornamental Tiffany Acorn Post Top Marine Ornamental Tiffany Ball Post Top Marine Ornamental Tiffany Traditional Post Top
Appearance-grade, white pine. MCA treatment, above ground contact. Appearance-grade, white pine. MCA treatment, above ground contact. Accommodates 4 x 4 in post. Appearance-grade, white pine. MCA treatment, above ground contact.
Woodtite 92523 Self Drilling Screw 2 in Palram 92520 Horizontal Closure Strip American Wood PLCR1X4-4 4-Sided Sanded Common Board
Woodtite 1 in screw (sku 940.4302) with EPDM washer is used to fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a siding or cladding application and Woodtite 2 in screw (sku 171.0235) also with EPDM washer is used to crown fasten PVC, Sun-n-Rain and Palruf or Polycarbonate, Suntop and Suntuf, corrugated panels in a roofing application. Used under Suntuf? panels on each cross support or purlin. Provides support for fasteners when attaching panels to framing. Custom profile matches pitch and depth of panel corrugation. Sanded on four sides.
Marine Ornamental Tiffany Deluxe Octagon Post Top Marine Ornamental Tiffany Post Top Cloverdale 28050 Iron-On Edge Band
Appearance-grade, white pine. MCA treatment, above ground contact. Appearance-grade, white pine. MCA treatment, above ground contact. Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
Band-It 88265 Iron-On Edge Band 7/8 in W 25 ft L Waddell BTB35 Base Block Cloverdale 28010 Edge Band
Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Applies to wood, plywood particle board, hardboard, metal and more. Prefinished and colorfast. Heat and stain-resistant, washable and static-free. Flexible and durable (not recommended for surface subject to sharp tools). Trims with edge trimmer or utility knife. Cut edge 1/2 in longer than surface to be covered with preheat (400 deg) iron, press length of edging till glue has melted while still hot, press edging down firmly with wood block or re-apply. Carded. No mitering decorative blocks. Installs with a hammer and finishing nails. Pine wood. Use on desktop, antique, shelving cabinets, crafts, hobbies and more. Pre-sanded and ready to finish. Trims with edge trimmer or utility knife. Paper backed with a resin-impregnated paper that prevents splitting. Furniture-grade, pre-sanded and ready to finish as desired with preheated (400 deg) iron, press length of edging till glue has melted if mistake in application is made, simply reheat and re-apply. Allow edging to cool completely before finishing other pieces.
   
 
1 2 3 ... 7