|
|
|
|
|
|
|
|
|
|
|
Used on Croft and Keller sliding screen doors. 1/4 in W x 3/8 in Dia flat nylon ball bearing wheel with 3/8 in threaded hex hub. Includes 2 rollers and 2 fasteners.
|
Non-handed, surface mount, economy pulls, plastic assembly. Contains one black inside pull, one black outside pull, #4 8 x 3/8 in Phillips flat head sheet metal screws. 1-7/8 in W x 4 in H.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
This die-cast keeper or strike is used by many screen door manufacturers. It is 7/32 in wide with a 1/4 in deep projection. It has an downward hook and adjustment slots that allows it to be adjusted up or down to the correct position to engage the latch.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Bent spring design used by Academy Mfg. and others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat-treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat-treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Used as top and bottom roller. Plastic wheel with center groove. 1-7/8 in L housing. Heat-treated, high-tension steel spring and #8-32 x 1-1/4 in Phillips pan head screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic center grooved wheel with steel housing, high-tension steel spring. Fits on Columbia Uni-fit doors. Contents: 2 roller assemblies.
|
Used as top and bottom roller by several patio door manufacturers. Consists of 1/4 in W center groove nylon wheel, 2 in L x 3/8 in W steel housing, high-tension heat-treated steel spring.
|
Non-handed; mortise installation, used by several door manufacturers. Includes one plastic inside and outside pull, one steel latch assembly, one plastic activator, one pop rivet and installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4 in - 20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat-treated steel v-spring (2 in L before and 2 in L after bend).
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by several door manufacturers for non-handed mortise installations. Sliding activator button designed for Jim Walters sliding roll-formed screen door. Includes black plastic inside pull and latch activator, black plastic outside pull, steel latch assembly, pop rivet and installation screws. 2-1/8 in W x 4-1/4 in H handles, 3-5/8 in CTC.
|
Used on Peachtree sliding screen doors. All nylon roller assembly consists of center-grooved wheel and 1-5/32 in L x 13/16 in H x 7/16 in D housing. Includes #8 x 3/8 in Phillips pan head screws.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat-treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used on Peachtree patio doors. Steel ball bearing roller, adjustable steel housing 2-1/4 in L x 1-9/16 in H x 17/8 in W. Contents: 1 roller assembly.
|
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16 in L x 1-1/8 in H x 11/16 to 9/16 in D die-cast housing assembly with 15/16 in flare width.
|
Flush mount fits into door stile. 1/16 in projection inside/outside of patio door. Reversible for right or left hand application. Packed with 4 different latch hooks to fit virtually all applications. For 1 to 1-1/4 in thick doors. 6-1/2 in distance between attaching screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
|
Nylon outer housing, aluminum inner housing with center grooved nylon wheel with adjustment cam. Contents: 2 roller assemblies, installation screws.
|
|
|
|
|
|
|
|
|
|
|
|
|
PL 15576 is a 96 in stainless steel track cap used to repair damaged patio or wardrobe door tracks. It can be cut to size. After the old track is prepared by grinding any spots that are wider than the original track width and cleaning it, the new track is simply pressed onto the old track after squirting a thin bead of silicone glue in the replacement track. Using a rubber mallet and a block of wood, the replacement track is snapped down over the old track.
|
2-roller tandem design. 6-1/4 in L x 1-3/16 in H x 11/16 in D adjustable steel housing with 2 steel ball bearing rollers.
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
Black die-cast supports w/wood handle. Mounting posts come finished in black colored paint and the wooden pull handle comes finished in a clear finish. Can be installed on doors with mounting hole centers ranging from 6-1/2 to 6-5/8 in center-2-center. Surface-mounted. Features a sturdy metal backer support behind the wood. Note: Color of wood may vary per shipment.
|
Wright replacement oak patio door handle can be installed on the interior plate of the V1195 or VK1195 flush-mounted latches to provide a larger pulling surface.
|
Mortise Lock for Sliding Patio Doors, 45 deg lever slot. Adaptor faceplate allows for use on wood and vinyl patio doors. 4-5/8 in hole center (hole to hole). 45 deg keyway.
|
|