|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most key electric start engines. Deluxe rubber coated grip for comfort. One key.
|
For 2-piece folding lawnmower handles. Mower handle bolts with knobs. Bolts.27 in Dia.
|
Fits small engine fuel lines. Contains one 1/16 in ID x 1/8 in OD x 1 ft and one 3/32 in ID x 3/16 in OD x 1 ft L. Fuel and chemical resistant. Smooth and flexible.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement line for ARNOLD power rake universal dethatching blade 490-100-0056 and 490-100-0083. 0.170 in thick replacement line.
|
For attaching any wheel with 1/2 in bore and 1-1/2 in W or smaller hub. Includes two bolts and two nuts.
|
Briggs & Stratton carburetor diaphragm kit. Used on 450-600 Series, 2 to 5 Gross HP horizontal engines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Briggs & Stratton carburetor primer bulb for 625 to 875 Series, 3.5 to 6.75 Gross HP Quantum, Intek 6.5 to 7 Gross HP engines.
|
Fits all wheels with 1/2 in bore and 1-1/8 up to 2 in W hubs. Includes 2 bolts, 2 nuts and two 9/16 in spacers.
|
Briggs & Stratton flywheel keys. Contains 3 keys. Used on most engines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Arnold Low Permeation Fuel Line, 1/4 in Dia Inside, 11/32 in Dia Outside, 2 ft L, Clear
|
1-3/4 in Dia vented high dome gas cap with liner. Fits Briggs & Stratton 3.5 to 6 hp. Quantum series engines, Max series and Europa series engines. Replaces Briggs & Stratton No 397974.
|
Briggs & Stratton carburetor primer bulb for 450-600 Series spring and Quattro engines.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most 2 to 4 hp Briggs & Stratton, Tecumseh and Clinton engines. Replaces Briggs & Stratton No. 89966 and others.
|
Display pack of 1 (298090S) fuel filter. This 150 micron fuel filter helps maintain fuel systems health by straining out foreign particles before they reach the carburetor. Designed for use on engines without a fuel pump, this OEM filter is used on Professional series and Extended Life series 7-15 HP engines and ensures proper fit and performance to maintain the life of your Briggs & Stratton engine.
|
Briggs & Stratton starter rope and grip. Used on most 2 to 4 Gross HP engines (lawn mowers, edgers, tillers and other equipment).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi-pneumatic diamond tread tire. 1-3/8 x 1/2 in offset hub. 50 lb. capacity.
|
Replaces BRIGGS & STRATTON No 491588. Fits 4 to 6 hp. Vertical shaft engines. 3 and 5 hp. Horizontal shaft engines. Quantum series No 121700 & 122700, 124700. Size of 5-1/4 in L x 4-1/2 in W x 1 in H.
|
Rubber starter handle with 88 in #4, 1/2 nylon cord.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-1/2 in Dia vented high dome gas cap with liner. Fits Briggs & Stratton 2 to 4 hp. engines. Replaces Briggs & Stratton No 298425/#493982.
|
Replaces Lawn Boy No 607580. Fits "D" series engines.
|
Fits most handheld equipment with 1/8 or 3/16 in ID fuel line. Contains one 1/8 in universal fuel filter and one 3/16 in universal fuel filter. Prevents dirt and other particles in fuel tank from reaching carburetor.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Semi-pneumatic diamond tread tire. 1-3/8 x 1/2 in offset hub. 50 lb. capacity.
|
Briggs & Stratton air filter foam element. Used on 3.5 to 3.75 gross hp Classic, Sprint after 1992 and 4 gross hp Quattro engines.
|
Inline fuel filter with a 2-step application.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replaces BRIGGS & STRATTON No 498596. Fits 6 to 6.5 hp. Vertical shaft Intek engines.
|
Fits Scott Magna torque, Sear and other 6.5 hp OHV Tecumseh engines. Replaces Tecumseh OE #36905. Contains 1 air filter.
|
Semi-pneumatic diamond tread tire. 1-3/8 x 1/2 in offset hub. 50 lb. capacity.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Foam air filter used on 3 and 3.5 hp lawnmower engines prior to 1982.
|
Arnold Lawn Mower Wheel, Tire Size: 6 x 1-1/2 in, Tread Type: Diamond, Tire Material: Plastic, Rim Material: Plastic, Maximum Load Capacity: 35 lb
|
Fits most 5, 7 and 8 hp Briggs & Stratton, Tecumseh, Kohler and Clinton engines. Replaces Briggs & Stratton No. 294599 and others.
|
|
|
