|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
Two-piece body. Multi-directional flow, chrome-plated brass ball, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL listed. Threaded ends comply with ANSI B1.20.1. -20 to 300 deg F temperature range, quarter turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
Heavy forged brass construction. 1-piece body. Non-displaceable chrome-plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
Gas appliance connector with lever handle. AGA Design certified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
BrassCraft's exclusive line of Italian made gas ball valves are specially engineered to provide unsurpassed product performance. From the stem to the body to the exclusive handle design, every detail has been master crafted for ease of operation and installation. This valve can be installed in the gas line run of copper tubing. Requires a 1/2 in OD flare nut to install.
|
BrassCraft's exclusive line of Italian made gas ball valves are specially engineered to provide unsurpassed product performance. From the stem to the body to the exclusive handle design, every detail has been master crafted for ease of operation and installation. This valve can be installed in the gas line run of copper tubing. Requires a 1/2 in OD flare nut to install.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
Two-piece body. Multi-directional flow, chrome-plated brass ball, CSA-ANSI Z21-15 (1/2 Psig), ANSI/ASME 316.44 (5G), UL listed. Threaded ends comply with ANSI B1.20.1. -20 to 300 deg F temperature range, quarter turn lever handle for positive on/off operation, coated aluminum handle for corrosion and solvent resistance.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
Gas appliance connector with lever handle. AGA Design certified.
|
Heavy forged brass construction. One piece body. Non-displaceable chrome plated forged brass ball. Coated aluminum handle, for use with natural manufactured, mixed liquefied petroleum and LP gas/air mixtures. Approved by the American Gas Association, Underwriters Laboratories and the Canadian Gas Association. Special rubber seals conform to ASTM D471. Threaded ends comply with ANSI B1.20.1. UPC coded. Bulk handy carton. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
Forged brass 1-piece body. Chrome-plated forged brass ball. Coated aluminum handle. 9/16-24 fine thread flare for 3/8 in tube. Threaded ends comply with ANSI B1.20.1. CSA certified, CSA- 3-88 certified. Threaded flare ends comply with SAE F513. UPC coded bulk.
|
Yellow handle. 1/2 psi maximum working pressure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
-20 to 300 deg F temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 psig), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1.
|
-20 to 300 deg F temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 psig), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
1-piece body, chrome-plated forged brass ball, coated aluminum handle. Threaded ends comply with ANSI B1.20.1. CSA certified. Threaded flare ends comply to SEA J513. CSA Z21 (psig) certified.
|
Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
B & K Gas Ball Valve, 1 in Connection, FPT Connection, 200 psi, Temperature Rating: -20 to -300 deg F, Body Material: Brass, Includes: (2) Valves
|
-20 to 300 deg F temperature range, sure-off tamper-resistant handle, quarter, push-to-turn operation prevents unintentional opening of valve, coated aluminum handle, multi-directional flow, one-piece body, chrome-plated brass ball. CSA-ANSI Z21.15 (1/2 psig), ANSI/ASME B16.44(5G),UL listed, threaded ends comply with ANSI B1.20.1.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Yellow handle. 1/2 psi maximum working pressure.
|
The Camco USA T and P relief valve safely relieves excess temperature and pressure in your water heater. The Camco USA T and P valve is safe for use up to 150 psi and/or to 210 deg F. It has a 3/4 in inlet or outlet and a 3-5/16 in long shank. Durable all copper alloy body.
|
|
|
