|
|
|
|
|
|
|
|
|
|
|
|
|
|
Green round washer head screw for switch and outlet boxes.
|
GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.
|
Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.
|
Convenient grounding accessories include products suitable for most job requirements.
|
Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Connects grounding wire to the grounding rod.
|
Connects grounding wire to the grounding rod.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.
|
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.
|
Cutler-Hammer Ground Bar Kit, 10 Terminals, 4.7 in Length, 2.3 in Width, 1/2 in Height
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Eaton Ground Bar Kit, Number of Terminals: 14, Wire Size: 14 to 4 AWG, 5.69 in L
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1.
|
Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.
|
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.
|
Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.
|
|
|
