|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line 3/4 in x 5/16 in plastic corner for window screen panels are designed to fit into square-cut ends of 5/16 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.
|
Prime-Line 3/4 in x 5/16 in plastic corner for window screen panels are designed to fit into square-cut ends of 5/16 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.
|
Prime-Line 3/4 in x 5/16 in plastic corner for window screen panels are designed to fit into square-cut ends of 5/16 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-line 3/8 in plastic corner for window panels are designed to fit into square-cut ends of 3/8 aluminum window frame material to repair or construct new aluminum-framed window panels. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.
|
Prime-line 5/8 in x 1/4 in plastic corner for window screen panels are designed to fit into square-cut ends of 1/4 aluminum screen frame material to repair or construct new aluminum-framed screens. Square-cut assembly eliminates the need for miter cutting providing for an easier frame construction by the homeowner.
|
Prime-Line 3/16 in x 3/16 in die-cast corner keys are used to replace damaged or broken corner keys found in storm window frame assemblies. May also be used to manufacture new storm windows and screens. Additional sizes and styles are available as are slide bolts and tilt keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-line 3/4 in x 7/16 in screen corners for Andersen window screens are designed to be only used with Andersen screen frames. These are primarily a replacement for broken or cracked corners but can be use to fabricate new screens if the correct frame is available. These corners are used when the screen frame is miter (angle) cut.
|
These outside miter screen frame corners are used to repair Pella aluminum screen frames. Measuring 3/4 in x 7/16 in.
|
These outside miter screen frame corners are used to repair Pella aluminum screen frames. Measuring 3/4 in x 7/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-line 3/4 in x 5/16 in x 48 in screen frame kits include all the product necessary to build 1 (one) screen frame. The kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame is mill finish and corners are gray.
|
Prime-line 3/4 in x 5/16 in x 48 in screen frame kits include all the product necessary to build 1 (one) screen frame. The kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame and corners are white finish.
|
Prime-line 3/4 in x 5/16 in x 48 in screen frame kits include all the product necessary to build 1 (one) screen frame. the kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame and corners are bronze finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-line 3/4 in x 7/16 in x 60 in screen frame kits include all the product necessary to build 1 (one) screen frame. The kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame is mill finish and corners are gray.
|
Prime-line 3/4 in x 5/16 in x 60 in screen frame kits include all the product necessary to build 1 (one) screen frame. The kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame is mill finish and corners are gray.
|
Prime-line 3/4 in x 5/16 in x 60 in screen frame kits include all the product necessary to build 1 (one) screen frame. the kit includes frame, corners and spline and instructions but does not include the screen fabric. screen fabric available separate. frame and corners are bronze finish.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-line 5/16 in x 3/4 in x 5 ft screen frame kits include all the product necessary to build 1 (one) screen frame. The kit includes frame, corners and spline and instructions but does not include the screen fabric. Screen fabric available separate. Frame and corners are white finish.
|
Prime-Line Square Cut Screen Frame Corner, Plastic, Gray, Dimensions: 3/4 x 5/16 in, Suitable for: PL14077 Screen Window Frame
|
Prime-Line Square Cut Screen Frame Corner, Plastic, White, Dimensions: 3/4 x 7/16 in, Suitable for: PL14042 Screen Frame
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line Square Cut Screen Frame Corner, Plastic, Bronze, Dimensions: 3/4 x 5/16 in, Suitable for: PL14079 Screen Frame
|
Prime-Line Square Cut Screen Frame Corner, Plastic, White, Dimensions: 3/4 x 5/16 in, Suitable for: PL14080 Screen Frame
|
Prime-Line Square Cut Screen Frame Corner, Plastic, White, Dimensions: 3/8 in, Suitable for: PL14062 Screen Frame
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Miter cut, standard 0.04 ga, use with 0.02 or 0.025 frame.
|
Prime-Line 3/4 in x 3/8 in stamped aluminum screen corners are designed to fit into aluminum framed screens constructed with 45 deg mitered cuts. They provide durability and longevity. Used to repair or construct new aluminum framed screens.
|
These outside miter screen frame corners are used to repair Pella aluminum screen frames. Measuring 3/4 in x 7/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-line 3/8 in aluminum window frame has a frame height of 25/32 in and top opening width of 0.180 in. The channel for the glass accepts single strength (1/16 in thick) or double strength (1/8 in) glass or Plexiglas. Several sizes of vinyl glazing channel are available. Use the appropriate glazing vinyl to insure proper fit. The frame can be miter (angle) cut or square cut.
|
Prime-line 3/4 in x 5/16 in 0.020 roll formed screen frame is designed for use on sliding aluminum windows. also often used to make replacement storm door screens. Prime-line screen frames are manufactured with a slight camber (bow) that provides tension to the finished screen. This features helps eliminate wrinkles in the screen fabric. The screen frame accepts up to 0.185 vinyl spline and uses miter (angle) cut screen corners.
|
Prime-line 3/4 in x 5/16 in 0.020 roll formed screen frame is designed for use on sliding aluminum windows. The frame is also used to fabricate replacement screens on storm doors. Prime-line screen frames are manufactured with a slight camber (bow) that provides tension to the finished screen. This features helps eliminate wrinkles in the screen fabric. The screen frame accepts up to.185 vinyl spline and uses miter (angle) cut screen corners.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prime-Line 5/16 x 3/4 in, 0.02 ga roll formed aluminum screen frame is typically used on sliding aluminum windows. Also on storm doors and mobile homes. Prime-Line screen frames are manufactured with a slight camber (bow) that provides tension to the finished screen. This features helps eliminate wrinkles in the screen fabric. The screen frame accepts up to 0.15 in vinyl spline and uses miter (angle) cut or square cut plastic screen corners.
|
Prime-Line 3/4 x 3/8 in, 0.02 ga roll formed screen frame is designed for use on sliding aluminum windows. Prime-Line screen frames are manufactured with a slight camber (bow) that provides tension to the finished screen. This features helps eliminate wrinkles in the screen fabric. The screen frame accepts up to 0.185 in vinyl spline and uses miter (angle) cut screen corners. White paint, 94 in long.
|
Prime-line 3/4 in x 7/16 in screen corners for Andersen window screens are designed to be only used with Andersen screen frames. These are primarily a replacement for broken or cracked corners but can be use to fabricate new screens if the correct frame is available. These corners are used when the screen frame is miter (angle) cut.
|
|
|
